Shop By Category

Banner

Information

FIRETROL There is 1 product.

Subcategories

  • Firetrol Mark II Type...

    Starting Method
    Full Voltage - Across The Line
    Motor Horsepower
    3 - 600 (depending on voltage)
    Operating Voltage
    200 - 600 VAC
    Short Circuit Current Rating
    100,000 Amps RMS Sym. (depending on HP/Voltage)

  • Firetrol Battery Charger

    The Firetrol® battery charger features a fully automatic 4 step charging cycle.  The charging cycles are as 
    indicated:
    Step 1: Qualification Stage (Flashing yellow and green LEDs)
     During this stage, the battery charger checks the batteries to insure they can accept a fast charge.  It  
     also checks for missing or defective batteries.  If the charger detects missing or defective batteries a  
     fault will be given (solid red LED).
    Step 2: Fast Charge (Solid yellow LED)
     Charges the batteries until they reach peak voltage.
    Step 3: Bulk Charge (Solid yellow LED and slow blinking green LED)
     Charges the batteries at a constant potential of peak voltage until current reaches 500mA.
    Step 4: Float Charge (Solid green LED)
     Trickle charges the batteries to maintain peak potential.
    Charging Cycle

    • Specification

    The battery charger also includes the following:
    • Selectable AC power voltage (115 or 230V)
    • Selectable battery voltage (12 or 24V)
    • Selectable battery type (Lead Acid, NiCad 9 or 18 cell, NiCad 10 or 20        cell)
    • AC power fuse (Type 3AG, 6A, 250V)
    • DC power fuse (Type 3AB, 20A, 250V)
    • Charger reset push-button (resets charging cycle to beginning)

Showing 1 - 1 of 1 item