onoae

FCON CUBEGM-Xa Series Gas mixer

Gas mixer [CUBEGM-Xα series] is a model in which a buffer tank is integrated with the touch panel gas mixer [CUBEGM-X series].

Gas mixer [CUBEGM-Xα series] is a model in which a buffer tank is integrated with the touch panel gas mixer [CUBEGM-X series]. The operability and functionality of the [CUBEGM-X series] has been taken over as it is, to cope with the supply flow fluctuation to the secondary side device.
Easy to move due to stoppered casters.

You can design and manufacture according to your application, specifications and budget. The capacity of the buffer tank can be suggested according to your request and specifications. In addition, since mixed gas (2 types) concentration meter can be installed, please feel free to contact us for more details.

  • [CUBEGM-Xα Series (Buffer tank specification)] is an all-in-one unit which have Touch panel, PLC unit, Mass Flow Controller, Power supply, Valve, Check Valve Gas Mixer and Buffer tank.
  • Program operation: Program operation is possible by setting the flow rate and time of each line.

Features

  • [CUBEGM-Xα Seires (Buffer tank specification)] is an all-in-one unit which have Touch panel, PLC unit, Mass Flow Controller, Power supply, Valve, Check Valve Gas Mixer and Buffer tank.
  • Program operation: Program operation is possible by setting the flow rate and time of each line.
  • Alarm function: Alarm sound is notified if an error occurs by any upper / lower limit setting of each line flow rate.
  • The pressure in the buffer tank is constantly monitored, and when the pressure falls below a fixed pressure, gas is automatically supplied to the buffer tank at the set mixing ratio. (Automatic stop and automatic restart pressure are fixed values, so please inquire in advance.)
  • Simply connect the piping to the IN side and OUT side.
  • Easy to move due to stoppered casters.
  • [CUBEGM-Xα Series] is a device which supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rate.
  • Analog mass flow controller [1000 Series] is mounted as a standard feature.
  • Mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
  • Can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that has been prepared in the mixing ratio.
  • It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
  • Applicable gases : Inert gas. (For more information, please contact us)

Applications

  • Various Gases (Please consult about corrosive gas)

Specifications

Model CUBEGM-X Series
Size CUBEGM-Xα2 : W350×D400×H1100(mm) ※Except protrusion / In the case of 10 L tank
CUBEGM-Xα3 : W430×D400×H1100(mm) ※Except protrusion / In the case of 10 L tank
CUBEGM-Xα4 : W510×D400×H1100(mm) ※Except protrusion / In the case of 10 L tank
Input power AC100-240V
Current consumption About 125VA ※In the case of 3 mass flow controllers equipped with
Flow rate control range 1 LINE : F.S.10SCCM~20SLM (However, the mixed gas flow rate must be less than 50 SLM)
Flow rate control MFC : C1000 Series or FCST1000L Series
Flow rate output signals 0-5VDC
INLET, OUTLET Valve Solenoid Valve
Leak Integrity ≦5×10-7Pa・m3/sec He
Pressure resistance 0.5MPa
Wetted surface material SUS316, PTFE, Fluoro-Rubber
(FCST1000L Series : Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber)
Standard fitting 1/4in.SWL (equivalent) ※For other fitting, please contact us.
Operating environment 5-50℃, 30-80%RH (Scope of accuracy guarantee : 15-35℃)
Accessory AC cable(2m), User’s manual, Written guarantee

● May be changed items depend on the number of mass flow controller. The other specifications, please contact us.

Downloads

Datasheet: FCON CUBEGM-Xa Series Gas mixer

Shopping Cart