FCON Manual CUBEGM Series Gas Mixer

FCON Manual CUBEGM Series Gas Mixer] is a manual all-in-one unit equipped with a mass flow controller, control power supply, valve, check valve, and gas mixer. Simply connect the piping to the IN side and OUT side. [CUBEGM Series] is a device that supplies a mixed gas species of 2, 3, and 4 to set up and control any flow rate.

Can be reduced the cost when you use a Gas mixer than purchasing gas cylinders that have been prepared in the mixing ratio. In addition to the standard type, it is available to design and manufacture in response to customers’ specifications or budgets. Please feel free to contact us.

[CUBEGM Series] is an all-in-one unit that has a mass flow controller, control power supply, valve, check valve, and gas mixer.
Simply connect the piping to the IN side and OUT side.

Features

[CUBEGM Seires] is an all-in-one unit which have mass flow controller, control power supply, valve, check valve and gas mixer.
Simply connect the piping to the IN side and OUT side.
[CUBEGM Series] is a device which supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rate.
Analog mass flow controller [1000 Series] is mounted as a standard feature.
Mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
Can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that has been prepared in the mixing ratio.
It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
Applicable gases : Inert gas. (For more information, please contact us)

Applications

Various Gases (Please consult about corrosive gas)

Specifications

Model	CUBEGM Series
Size	CUBEGM2 : W315×D298×H250(mm) ※Except protrusion CUBEGM3 : W415×D298×H250(mm) ※Except protrusion CUBEGM4 : W515×D298×H250(mm) ※Except protrusion
Input power	AC85-260V
Current consumption	MAX 1A ※In the case of 4 mass flow controllers equipped with
Flow rate control range	1 LINE : F.S.10SCCM～20SLM (However, the mixed gas flow rate must be less than 50 SLM)
Flow rate control	MFC : C1000 Series or FCST1000L Series
Flow rate output signals	0-5VDC
INLET, OUTLET Valve	Ball Valve
Leak Integrity	≦5×10^-7Pa･m³/sec He
Pressure resistance	1MPa
Wetted surface material	SUS316, PTFE, Fluoro-Rubber (FCST1000L Series : Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber)
Standard fitting	1/4in.SWL (equivalent) ※For other fitting, please contact us.
Operating environment	5-50℃, 30-80％RH (Scope of accuracy guarantee : 15-35℃)
Accessory	AC cable(2m), User’s manual, Written guarantee