onoae

Maxell ER Series Lithium Thionyl Chloride Battery

Maxell ER Series Lithium Thionyl Chloride Battery A protective resistor is used to prevent the battery from being charged by large surges of current during diode failure.

Maxell ER Series Lithium Thionyl Chloride Battery

Maxell ER Series Lithium Thionyl Chloride Battery a protective resistor is used to prevent the battery from being charged by large surges of current during diode failure. Please set the resistor so that the maximum current shown in the right table is not exceeded. For example, say an ER6 battery is used in sample circuit A in combination with a main power source 5 volts. Since the permitted charge current is 100μA and this battery’s voltage is 3.6V, let the resistor be R>= (5V-3.6V)/100μA=14k ohm, meaning that at least 14k ohm is required.

This battery is a high energy density sealed battery containing dangerous (Lithium) and deleterious (Thionyl Chloride) materials. For this reason, improper handling of the battery could lead to distortion, leakage*, overheating, explosion, fire, or generation of irritating/corrosive gases, causing bodily injury or equipment trouble.

Features

  • High 3.6-V voltage
    The lithium thionyl chloride battery achieves a high voltage of 3.6 V.
  • Flat discharge characteristics
    The change of internal resistance during discharge is minimal, allowing for flat discharge voltage until end of discharge life.
  • High energy density
    Provides high energy density of 970m Wh/cm3 with discharge current of 100 µA (ER6 type).
  • Wide usable temperature range
    Can be used over a wide temperature range : – 55 deg. C to +85 deg. C (please consult with Maxell, if using in temperatures of -40 deg. C or less).
  • Superior long-term reliability
    The extremely low self-discharge, together with the use of a hermetic seal, allows for stable use over long periods.

Applications

  • OA Machines (Fax, Copiers, Printers)
  • Desktop PCs
  • PDAs
  • Medical Instruments, Cash Registers
  • FA Instruments (Measuring Instruments, Onboard Microcomputers, Sensors)
  • Electronic Meters (Gas, Water, Electricity)
  • ETC (Electronic Toll Collection System)

Specifications

Model ER18/50 ER17/50 ER6 ER6C ER17/33 ER3 ER3S
Nominal Voltage (V) 3.6 3.6 3.6 3.6 3.6 3.6 3.6
Nominal Capacity (mAh)** 3,650 2,750 2,000 1,800 1,600 1,100 790
Nominal Discharge Current (mA) 125 125 100 100 75 40 35
Operating Temperature Range (deg. C) –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85
Dimensions* Diameter (mm) 18 17 14.5 14.5 17.0 14.5 14.5
Height (mm) 52.6 52.6 53.5 51 35 29.9 26
Weight (g)* 22 20 15 15 13 8 7

Model ER18/50 ER17/50 ER6 ER6C ER17/33 ER3 ER3S
Nominal Voltage (V) 3.6 3.6 3.6 3.6 3.6 3.6 3.6
Nominal Capacity (mAh)** 3,650 2,750 2,000 1,800 1,600 1,100 790
Nominal Discharge Current (mA) 125 125 100 100 75 40 35
Operating Temperature Range (deg. C) –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85
Dimensions* Diameter (mm) 18 17 14.5 14.5 17.0 14.5 14.5
Height (mm) 52.6 52.6 53.5 51 35 29.9 26
Weight (g)* 22 20 15 15 13 8 7
  • Dimensions and weight are for the battery itself, but may vary depending on terminal specifications and other factors.
  • Nominal capacity indicates duration until the voltage drops down to 3.0V when discharged at a nominal discharge current at 20 deg. C.
  • Data and dimensions are just reference values. For further details, please contact your nearest Maxell dealer or distributor.
Shopping Cart