onoae

Nidec Copal CRV16 Single-turn Conductive Plastic Potentiometer

Nidec Copal CRV16 Single-turn Conductive Plastic Potentiometer Special film resistors and original contact construction provide long life, with a degradation that is theoretically infinitely small. Conductive plastic types include single-turn types and linear types, both for use in servo drives.

Nidec Copal CRV16 Single-turn Conductive Plastic Potentiometer Potentiometers are displacement sensors that produce electrical output (voltage) in proportion to the mechanical displacement. They are basically composed of a resistor and a wiper (brush), with the mechanical displacement of the resistor relative to the wiper being accurately converted into an electrical voltage output.

Potentiometer

 

Nidec Potentiometer

Model of potentiometer

Wirewound Type

Precision wire winding technology has been used to achieve low noise and long life. Wirewound types include the single-turn J series for use in servo drives and the multiturn M series for use in settings.

Conductive Plastic Type

Special film resistors and original contact construction provide long life, with degradation that is theoretically infinitely small. Conductive plastic types include single-turn types and linear types, both for use in servo drives.

Cement Type

The use of cermet resistors allows for low prices. The degradation is theoretically infinitely small. Cermet types are single-turn for use in servo drives and for settings.

Optical Contactless Type

Contactless configuration offers a much longer life and lower noise compared with the conventional contact method.

Features

  • Long life
  • Cost effective
  • High linearity through precision wire winding
  • RoHS compliant

Applications

Nidec Copal Electronics’ products are widely used in various applications, mainly in industry.

  • Vehicle, Construction machine
  • Medical equipment
  • Analytical / Messuring equipment
  • FA equipment
  • Residential facility, Security
  • Social infrastructure, Commercial tool, etc.

Specifications

Electrical characteristics

Nominal resistance value 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ
Resistance tolerance ± 20%
Resolution Essentially infinite
Independent linearity ± 1%
Effective electrical angle 220° ± 10°
Power rating (at 40 °C) 0.25W
Dielectric strength 500, 1min
Insulation resistance 50 MΩ minimum(at DC 500 V)
Temp. coefficient of resistance ± 400 ppm/°C
Output smoothness 0.5 % maximum

Mechanical characteristics

Mechanical angle 260° ± 5°
Rotational torque 3.92 {40}mN·m {gf·cm}
Stop strength 0.196 {2} N·m {kgf·cm} minimum
Rotational life (cycles) 500 thousand cycles

Environmental characteristics

Operating temp. range −10 ~ 80°C
Net weight Approx.5g
Protection grade IP20

Downloads

Datasheet: Nidec Copal CRV16 Single-turn Conductive Plastic Potentiometer

Shopping Cart

You cannot copy content of this page