Fluidwell F016 Safe Flow rate Indicator robust Intrinsically Safe flow rate indicators / totalizers for safe and hazardous areas. Combining easy operation and extreme durability in the toughest conditions.

The F016 is a local indicator / transmitter which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the pulse output. On-screen engineering units are easily configured from a comprehensive selection.

Features

Eight point linearization of the flow curve – with interpolation.
Scaled pulse output reflecting the accumulated total.
Displays total and flow rate simultaneously.
Large digit selection for flow rate or total.
Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
Total – resettable: seven 17mm (0.67″) digits.
Accumulated total – not resettable: eleven 8mm (0.31″) digits.
Separate engineering units for flow rate and total.
LED backlight with adjustable intensity.
Intrinsically safe according ATEX, IECEx, FM and CSA C-US.
GRP, Aluminum or high grade stainless steel enclosure.
Auto backup of settings and running totals in EEPROM memory.
Easy configuration with clear alphanumerical display.
Ambient temperature: -40°C to +80°C (-40°F to 176°F).
Various accessories are available for this product.

Applications

Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Specifications

Signal Inputs

Flowmeter Inputs

- - Pulse type inputs:
    Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.

Signal Outputs

Pulse outputs

- - Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
    Max. frequency: 500Hz.
    Adjustable pulse length from 1 msec. to 10 seconds.
  - Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Alarm outputs

- - None.

Analog outputs

- - None.

Supply

Power Supply

- - Long life Lithium battery.
  - 8 – 24V AC/DC.
  - 115 – 230V AC.
  - Basic: 8 – 30V DC.

Sensor Supply

- - 3.2, 8.2, 12, 24V DC.

Hazardous Area

Intrinsically Safe

- - ATEX:
    Gas: II 1 G Ex ia IIC T4 Ga
    Dust: II 1 D Ex ia IIIC T100°C Da
  - IECEx:
    Gas: Ex ia IIC T4 Ga
    Dust: Ex ia IIIC T100°C Da
  - CSA:
    I.S. Class I/II/III, Div 1, Grp A…G, T4
    Class I, Zone 0, AEx ia IIC T4
  - FM:
    I.S. Class I/II/III, Div 1, Grp A…G, T4
    Class I, Zone 0, AEx ia IIC T4

Explosion Proof

- - ATEX:
    Gas: II 2 G / Ex d IIB T5 Gb
    Dust: II 2 D / Ex t IIIB T100°C Db

Communication

- - Modbus communication available on F1-Series products.
  - HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.

Downloads

Datasheet: Fluidwell F016 Intrinsically Safe Flow rate Indicator

Fluidwell F016 Safe Flow rate Indicator

Features

Applications