onoae

Tokyo Ryuki Kogyo RM-1000 Mass Flow Meter

Tokyo Ryuki Kogyo RM-1000 Mass Flow Meter the basic configuration of the mass flow meter consists of a thermal mass flow sensor, a bypass laminar flow element, and a bridge circuit. An electric current is passed through the resistor wound around the sensor to generate heat.

Tokyo Ryuki Kogyo RM-1000 Mass Flow Meter the basic configuration of the mass flow meter consists of a thermal mass flow sensor, a bypass laminar flow element, and a bridge circuit. An electric current is passed through the resistor wound around the sensor to generate heat. When a part of the gas that enters from the inlet flows into the sensor, the temperature distribution of the sensor changes, which is captured by the bridge circuit and taken out as a flow rate output signal.

Tokyo Ryuki Kogyo RM-1000 Mass Flow Meter with a digital display for visualization of the flow rate, Instantly grasp the flow rate with a digital display, Easy wiring with a display, Output is 1 to 5V or 4 to 20mA, Equipped with a jog switch for easy range switching, Compact cylindrical design makes installation easy (any mounting location), Originally developed flow sensor with less error, Controller can be retrofitted.

Features

  • Equipped with a digital display for visualization of the flow rate
  • Instantly  grasp the flow rate with a digital display
  • Easy wiring with a display
  • Output is 1 to 5V or 4 to 20mA
  • Equipped with a jog switch for easy range switching
  • Compact cylindrical design makes installation easy (any mounting location)
  • Originally developed flow sensor with less error
  • Controller can be retrofitted

Applications

  • Industrial robots
    • Automobiles
    • Aerospace
    • Measurement analysis
  • Medical
  • Food (Semiconductor mass flow meters equipped with microchip sensors)

Specifications

low range ~ 20SLM 50SLM 100SLM 200SLM
Gas to be measured Air N2 O2
Flow accuracy ± 1% FS Reproducibility within ± 0.3% FS
responsiveness 50ms or less
Maximum working load pressure -0.09MPa ~ + 0.7MPa
Withstand voltage 1MPa
Usable ambient temperature 0 ℃ ~ 50 ℃
Flow output signal 1-5VDC ⇔ 4-20mA & serial communication
Power supply used + 12V ~ + 24V ± 0.5V DC 0.5A
Control range 0-100% FS
Main unit connection port One-touch fitting Tube outer shape Φ6
Gas connection member quality SUS303, POM, brass or aluminum byton
weight 120g
principle The basic configuration of the mass flow meter consists of a thermal mass flow sensor, a bypass laminar flow element, and a bridge circuit. An electric current is passed through the resistor wound around the sensor to generate heat. When a part of the gas that enters from the inlet flows into the sensor, the temperature distribution of the sensor changes, which is captured by the bridge circuit and taken out as a flow rate output signal.

Please note that the specifications or appearance are subject to change without notice for improvement.

Downloads

Datasheet: Tokyo Ryuki Kogyo RM-1000 Mass Flow Meter

Shopping Cart

You cannot copy content of this page