onoae

Wenglor HD11PCV3 Reflex Sensor Background Suppression

Wenglor HD11PCV3 Reflex Sensor Background Suppression these sensors detect distance by measuring angles. They are particularly good at recognizing objects in front of any background. The color, shape, and surface characteristics of the object have practically no influence on sensor-switching performance.

Wenglor HD11PCV3 Reflex Sensor Background Suppression these sensors detect distance by measuring angles. They are particularly good at recognizing objects in front of any background. The color, shape, and surface characteristics of the object have practically no influence on sensor-switching performance. Reflex sensors with background suppression detect and measure objects contactless and detect them in front of any defined background. They work with red light, infrared light, blue light, or laser light.

Features at a Glance

  • Stainless steel housing
  • Adjustable switching distance
  • Electronic background suppression
  • Red light

Electrical Data
Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 600 Hz
Response Time 833 µs
Temperature Drift < 5 %
Temperature Range -25 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
PNP Contamination Output/Switching Current 50 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Features

  • Stainless steel housing
  • Adjustable switching distance
  • Electronic background suppression
  • Red light

Applications

Leading Edge Detection of Furniture Parts Made of Panel Materials with Reflex Sensors with Background Suppression

During furniture production, chips accumulate on the surface due to drilling, milling or grooving. Special cleaning systems are available for cleaning sensitive surfaces. Reflex sensors with background suppression in the metric stainless steel housing are used to detect the front edges of the dirty plates from distances of up to 120 mm. This allows the plates to be positioned. Thanks to the robust stainless steel and background suppression, dust, chips and dirt do not influence detection – regardless of the shape, color and surface of the material.

Reflex Sensors With Background Suppression

Reflex sensors with background suppression detect and measure objects contactlessly and detect them in front of any defined background. They work with red light, infrared light, blue light or laser light. Thanks to the principle of angle measurement, the color, shape and object surface have no influence on the switching behavior of the sensors.

Specifications

Optical Data

Range 120 mm
Setting Range 35 … 120 mm
Switching Hysteresis  < 5 %
Light Source Red Light
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 600 Hz
Response Time 833 µs
Temperature Drift < 5 %
Temperature Range -25 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
PNP Contamination Output/Switching Current 50 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Mechanical Data

Setting Method Potentiometer
Housing Material Stainless Steel
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4-pin

Output

Contamination Output yes
PNP NO yes

Adjustable parameters

Circuit NC
NC/NO
NO

Table 1

Detection Range 60 mm 120 mm
Light Spot Diameter 2,5 mm 5 mm

Downloads

Datasheet : Wenglor HD11PCV3 Reflex Sensor with Background Suppression

Shopping Cart

You cannot copy content of this page