Maeda Koki MKCT Type Air Signal – Flow Indicator is the flow sight that confirms the flow of a fluid by a motion of the float in a transparent tube. Since this product is protected with a metal protection cover, it does not almost have a fear of breakage by the impact from the outside, etc.

Since the spring is being used for this product in a transparent tube, the postures when attaching is free, such as facing up, facing down, and sideways. A maximum of 80℃ of oil heat-resistant products can be used. Standard pressure resistance: 1MPa

It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter

Features

It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line. I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
Because use a spring inside, the posture when attach it looks up and look down; and; I can perform sideways-facing freely

Applications

MKCT is a flow indicator, flow switch, and flow control depending on the type. It can confirm gaseous approximate flow quality of the water by viewing. With protective cover.

Specifications

Fluid		Gas
Connection		Rc internal thread	Change to R screw The combination with the R screw is possible, too.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent pipe	Acrylic	–
	Coupling	C3604 (brass)	I can produce the product made in SUS, too.
	Protective cover	BC	I can produce the product made in aluminum, too.
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	O ring	Nitrile rubber	–

List of models

Model	Dimensions (mm)				Maximum flow quantity (L/min)
Model	Connection	Full length	Overall width	Depth	Maximum flow quantity (L/min)
MKCT20-1TAR	Rc1/8	80	30	22	200
MKCT20-2TAR	Rc1/4	80	30	22	200
MKCT20-3TAR	Rc3/8	86	30	22	200
MKCT30-2TAR	Rc1/4	104	43	32	500
MKCT30-3TAR	Rc3/8	104	43	32	500
MKCT30-4TAR	Rc1/2	110	43	32	500
MKCT35-4TAR	Rc1/2	145	50	44	1000
MKCT35-6TAR	Rc3/4	145	50	44	1000
MKCT45-6TAR	Rc3/4	171	62	50	2000
MKCT45-8TAR	Rc1	171	62	50	2000