onoae

Wenglor P1KT003 Reflex Sensor Energetic

Wenglor P1KT003 Reflex Sensor Energetic

Wenglor P1KT003 Reflex Sensor Energetic the reflex sensor works with red light according to the principle of energy and is designed to detect objects without a background. The switching distance is set for a given object. Note that: Bright objects reflect transmitted light better than dark objects.

Get a Quote

Wenglor P1KT003 Reflex Sensor Energetic the reflex sensor works with red light according to the principle of energy and is designed to detect objects without a background. The switching distance is set for a given object. Note that: Bright objects reflect transmitted light better than dark objects. Dark (matte) objects can also be differentiated from bright (glossy) objects. This means that presence or stack height checks can be conducted or counting tasks carried out. The IO-Link interface can be used to configure the reflex sensors (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and distance values.

Features at a Glance

  • Condition monitoring
  • Large detection range
  • High switching frequency
  • IO-Link 1.1

Electrical Data

  • Supply Voltage: 10 … 30 V DC
  • Supply Voltage with IO-Link: 18 … 30 V DC
  • Current Consumption (Ub = 24 V): < 20 mA
  • Switching Frequency: 500 Hz
  • Switching frequency (speed mode): 1,000 Hz
  • Response Time: 1 ms
  • Response time (speed mode): 0.5 ms
  • Temperature Drift: < 10 %
  • Temperature Range: -40 … 60 °C
  • Switching Output Voltage Drop: < 2 V
  • Switching Output/Switching Current: 100 mA
  • Residual Current Switching Output: < 50 µA
  • Interface: IO-Link V1.1
  • Protection Class: III

Features

  • Condition monitoring
  • Large detection range
  • High switching frequency
  • IO-Link 1.1

Applications

Presence Check of Nonwoven Fabric on Coffee Capsules with Reflex Sensors

In order for hot water in coffee machines to be pressed evenly through the coffee capsules and thus ensure a uniform taste, wafer-thin white nonwoven fabric must be inserted into the capsules. Once the coffee powder has been poured into the capsules and the nonwoven fabric has been placed on it, energy reflex sensors check the presence of the nonwoven fabric. Mounted above the conveyor belt, they reliably detect the difference between the darker coffee powder and the white nonwoven fabric – even at high belt speeds.

Energetic Reflex Sensors

Reflex sensors check objects for presence, check stack heights or perform counting tasks. They are used when objects need to be detected without a defined background. For this purpose, they use red light or infrared light according to the energy principle.

Specifications

Optical Data
Range 700 mm
Switching Hysteresis  < 10 %
Light Source Red Light
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux

Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M8 × 1; 4-pin
Optic Cover PMMA

Safety-relevant Data
MTTFd (EN ISO 13849-1) 2,630.72 a

Output
IO-Link yes
NPN NO/NC antivalent yes

Adjustable parameters
Output Push-pull
NPN
PNP
Circuit Inactive
Error output
NC
NC+NO
NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point
Emitted light

Table 1
Detection Range 100 mm 300 mm 700 mm
Light Spot Diameter 20 mm 40 mm 80 mm

Downloads

Datasheet : Wenglor P1KT003 Reflex Sensor Energetic

Related products

Need help? Call our award-winning support team 24/7 at (+62) 81703007707

logo onoae footer

Established in 2019, ‘Onoae’ is an e-commerce from Indonesia that sells the needs of machine parts, measuring, devices, equipment, electrical parts and controls. 

Head Office

Products

Site Links

Shopping Cart

You cannot copy content of this page