onoae

EGE IO-Link Flow sensors SDNC 500

DNC 500 sensors with IO-Link function are the smart solution for process monitoring.

SDNC 500 sensors with IO-Link function are the smart solution for process monitoring. They can measure the flow speed and temperature in fluid mediums. To do so, there is a configuration software which configures the sensors via an IO-Link / USB master. The models …GAPL provide flow data for water-based mediums as as linear otuput signal.

Features

  • Flow and temperature measurement
  • Easy configurable via IO-Link interface
  • Process data can also be used for remote maintenance
  • Analog and switching output in SIO-mode available

Applications

SDNC 500 sensors with IO-Link are the smart solution for process monitoring. They can measure the flow speed and temperature in fluid mediums. To do so, there is a configuration software which configures hte sensor via an IO-Link / USB master. The models …GAPL provide flow data for water-based mediums as an linear output signal.

Specifications

ID-No. P11376 P11378 P11380
Type SDNC 503 GANPL SDNC 506 GANPL SDNC 508 GANPL
Measuring tube Ø D        [mm] 3.5 5.5 7.5
Process data
Flow                            [Steps] 0…1023 0…1023 0…1023
Temperature            [°C x 0.1] 0…600 0…600 0…600
Detection range
Water-based media   [l/min] 0.020…0.500 0.05… 2.00 0.10… 4.00 0.20… 8.00
Resolution                     [l/min] 0.001 0.01 0.02 0.05
ID-No. P11381 P11375 P11377 P11379
Type SDNC 502 GAPL SDNC 503 GAPL SDNC 506 GAPL SDNC 508 GAPL
Measuring tube Ø D        [mm] 3.5 3.5 5.5 7.5
Process data
Flow                 [l/min x 0.001] 0…500
[l/min x 0.01] 0…200 0…400 0…800
Temperature            [°C x 0.1] 0…600 0…600 0…600 0…600
Adapter L                        [mm] 28 28 28 100
Supply voltage                   [V] 18…30 DC IO-Link-Specifications
Current consumption      [mA] ≤40 Revision 1.1
Switching output             [mA] 150 (25 °C) Baud rate COM 2
Analog output                  [mA] 4…20 Minimum cycle time    [ms] 3.50
Ambient temperature        [°C] 0…60 Process data            [Byte] 4
Medium temperature        [°C] 0…60
Reaction time 1                                   [s] 0,5
Compressive strength     [bar] 10
Sensor material AISI 316 Ti
Housing material PBT-GF30
Protection             [EN 60529] IP 67
Connection M12 connector
depending on medium and
on operation parameters
Accessories (Selection) Cable Mounting bracket IO-Link / USB master set
ID-No. Z00446 Z01215 Z01216
Type SLW 4-2 Mounting bracket IOL-Master-Set V1.1
Design Cable plug housing
M12x1
2 m PVC-cable 4×0.25 mm²
Bracket 37 x 25 x 26 mm (W x L x H)
Aluminium
IO-Link-Master Connection cables Power supply

Downloads

Datasheet: EGE IO-Link Flow sensors SDNC 500

Shopping Cart