Rheonik RHM30 Coriolis Mass Flow Meter With highly accurate measurement performance and extreme capabilities, Rheonik meters are a natural choice for many applications and quickly provide payback through improved product quality and greatly reduced maintenance. Whether used for transfer, batching, process feed or control, Rheonik meters can provide online flow and density measurement.

Definition of Rheonik RHM30 Coriolis Mass Flow Meter

is available with a wide choice of material options to suit benign and aggressive applications. Heavy duty variants meet high pressure and high temperature needs while providing the highest accuracy performance.

Range: 10 kg/min up to 900 kg/min
Pressure: up to 405 bar (5874 psi)
Temperature: -196°C (-321°F) up to +350°C (662°F)
Accuracy: 0.1 % of rate
Materials: SS 316L / SS 316Ti, Alloy C22 – 2.4602, Super Duplex – 1.4410, Tantalum – UNS R05200
Process Connection: 1 ¼” up to 3″
CONFIGURE

Features

Typical measuring range up to 900 kg/min (1984.16 lb/min)
Pressure ratings up to 462 bar (6701 psi)
Temperature ratings from -196 to +350 °C (-320 to +662°F) –extended on request
Mass flow uncertainty down to 0.1 %
Repeatability down to 0.05 %
4 kHz measurement updates and response time of less than 10 mswhen used with RHE
40 Series transmitters
Accurately measure flow rates down to 10 kg/min
The Rheonik AnyPipeFit Commitment providescustom process connection type and size flexibility on any meter to suit your existing plant, saving time and expense on installation costs
Approved for use in hazardous areas
SS 304 Stainless steel enclosure, SS 316 optional
Integral and remote transmitter versions available

Applications

• General Flow Control
• Plant Balance
• Additive Dosing
• High Temperature Fluids
• Viscous Fluids 0
• Mixing,Blending. Batching QI
• Package and Container Filling

Specifications

Nominal Flow (Qₙₒₘ)*	800 kg/min (1763.7 lb/min)
Maximum Flow (Qₘₐₓ)*	900 kg/min (1984.2 lb/min)
Typical Minimum Flow (Qₘᵢₙ)*	10 kg/min (22.1 lb/min)
Serial Tube / Single Path	Flow rates Qmax, Qnom and Qmin for “serial” sensors will be 50% of the above listed parallel/dual path version.
Operating Temperature	Fluid temperature range options cover applications from -196°C to +350°C (-320°F to +662°F). For integral transmitter versions please refer to transmitter datasheet
Ambient Temperature	-50 °C to +80 °C (-60 °F to +180 °F) (standard)
Pressure Ratings	Up to 462 bar / 6701 psi – dependent upon material
Electrical Connection Sensor w/o Integral Transmitter	M20 x 1.5 standard cable entry for JM, SM terminal box versions Optional entries available : ½” NPT or M25 x 1.5 (only for SM) or ¾” NPT (only for SM) Max. cable length to remote RHE transmitter 100 m / 328 ft
Sensor Enclosure Materials	Stainless steel 304 (standard), SS 316 (optional) Coated aluminum terminal box, SS 316 terminal box (optional)
Enclosure Type	Protection class IP66, NEMA 4X (standard), IP66/67, NEMA 4X/6 (optional)
Wetted Materials	1.4571 (SS 316Ti), 1.4410 (SuperDuplex), 2.4602 (Alloy C22) – standard Tantalum – Consult Factory Seal material (manifold construction): PTFE Additional/customer specific materials available upon request
Process Connections	Nearly any – the Rheonik AnyPipeFit Commitment. Consult factory for types/sizes not listed in this data sheet on the Mechanical Construction pages
Pressure Rating Compliance	Europe – PED: Module A2, Module B3.1+C2 Canada – CRN: Canadian Registration Number
Certifications and Approvals	ATEX / IECEx Approvals for Zone 0, 1, 2 (details see page 13) North American Approvals Class I, Div. 1, 2, Gr. A,B,C,D, Zone 0, 1, 2 MID custody transfer approval (OIML R117) American Bureau of Shipping (ABS) Product Type Approval for use on marine vessels
Testing and Inspection	All sensors are hydro tested, calibrated and supplied with a traceable calibration certificate. Customized calibration and testing services are available
Project Documentation and QA, Services	Rheonik offers a full set of services for large and complex engineering projects. Typical services offered are, but not limited to: •Certificates of origin and conformity, mill certificates •Data books including WPAR, WQS, NDT, test & quality plans, functional testing, calibration procedures, customized packing, factory acceptance etc. •Painting to project specification •Start up and commissioning services on/offshore
Options	Enclosure heating for high temperature applications Cleaning for oxygen service , … For more consult factory

* At Qₙₒₘ pressure drop across a parallel tube sensor will be approximately 0.75 bar (10.1 psi) for H₂0. Sensors can be operated at higher flow rates up to Qₘₐₓ but pressure drop will be higher. Typical Minimum Flow Qₘᵢₙ is the recommended lowest flow rate for an accurate measurement. Sensors will measure flow rates lower than Qₘᵢₙ but uncertainty will increase beyond 1 % of rate.

The flow rate specifications above relate to standard pressure, parallel tube, manifold sensor versions. Models with higher pressure ratings have increased wall thickness and will have higher pressure drops.