onoae

Wenglor P1KE006 Through Beam Sensor

Wenglor P1KE006 Through Beam Sensor the through-beam sensor works with red light as well as a transmitter and a receiver. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor.

Wenglor P1KE006 Through Beam Sensor the through-beam sensor works with red light as well as a transmitter and a receiver. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.

Features at a Glance

  • Condition monitoring
  • The high light intensity with a large switching reserve
  • IO-Link 1.1
  • Test input for high operational reliability

Electrical Data

  • Sensor Type: Receiver
  • Supply Voltage: 10 … 30 V DC
  • Supply Voltage with IO-Link: 18 … 30 V DC
  • Current Consumption (Ub = 24 V): < 20 mA
  • Switching Frequency: 1,000 Hz
  • Switching Frequency (interference-free mode): 500 Hz
  • Response Time: 0.5 ms
  • Response time (interference-free mode): 1 ms
  • Temperature Drift: < 10 %
  • Temperature Range: -40 … 60 °C
  • Switching Output Voltage Drop: < 2 V
  • Switching Output/Switching Current: 100 mA
  • Residual Current Switching Output: < 50 µA

Features

  • Condition monitoring
  • High light intensity with large switching reserve
  • IO-Link 1.1
  • Test input for high operational reliability

Applications

B_BED_1K_01.eps
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning
68 = supply voltage indicator

Specifications

Optical Data

Range 6,000 mm
Smallest Recognizable Part see Table 1
Switching Hysteresis  < 10 %
Light Source Red Light
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M8 × 1; 3-pin
Optic Cover PMMA

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,111.25 a

Output

NPN NO yes
IO-Link yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point

Table 1

Distance transmitter/receiver 1 m 2 m 6 m
Smallest Recognizable Part 4 mm 1 mm 1 mm

Downloads

Datasheet : Wenglor P1KE006 Through Beam Sensor

Shopping Cart

You cannot copy content of this page