Description

Mitsubishi Electric 7011B Single Phase Ups

Mitsubishi Electric 7011B Single Phase Ups was specially designed to meet the requirements of high-power density applications. Pairing this battery with the Mitsubishi Electric 1100 series of UPS provides you with long runtimes with a minimal number of cabinets and reduced maintenance. Pair the high power density with its 15-year design life and small footprint and the BLC04 lithium battery solution is a clear choice for demanding small UPS applications such as Edge Data Centers.

Choosing a reliable and safe energy storage vendor is of paramount importance. Mitsubishi Electric partners with the largest manufacturers of energy storage batteries in the world; their expertise in the design and manufacturing of lithium-ion modules paired with redundant control architectures creates one of the safest lithium-ion systems on the market. When you need your UPS battery to be as reliable as a Mitsubishi Electric UPS, look no further.

Features

Available in 6, 8, 10, & 12 kVA
Space saving footprint
Up to 91.5% efficient
Transformerless design using full IGBT power electronics LCD touchscreen display
Simple to start up, operate, and maintain
Internal batteries included; external batteries can be added to achieve longer runtimes

Applications

Individual computers
Small networks
Communications systems
Security systems
Point of sale systems

Specifications

Mitsubishi Electric 7011B Single Phase Ups
Rated Output kVA	6	8	10	12
Rated Output kW	4.2	5.6	7	8.4
AC INPUT
Configuration	1 phase 3 wire
Voltage	240/120V, 208/120V +10% to -30%
Frequency	50/60Hz +/-5%
Power Factor	.98 Lagging
Reflected Current THD	4% typ. at 100% load; 7% typ. at 50% load
BATTERY
Type	VRLA
Backup Time	10 Minutes	18 Minutes	18 Minutes	10 Minutes
Nominal Voltage	216 Vdc
Minimum Voltage	173 Vdc
Number of Cells	108
AC OUTPUT
Configuration	1 Phase 3 Wire
Voltage	240/120V, 208/120V
Voltage Stability	+/-2% steady state
Voltage Unbalance	2% typical at 100% unbalanced load
Voltage THD	2.5% maximum with linear load
Transient Response	+/-5%
Transient Recovery Time	50 ms
Frequency	50/60 Hz
Frequency Regulation	+/-0.05% in free running mode
Phase Displacement	1deg Typical at 100% load
Power Factor	0.70
Power Factor Range	0.7 to 1.0 lag (within output kW rating)
Overload Capacity	105%-150% for 1 minute
Environmental
Cooling	Forced Air
Operating Temperature	32°F to 104°F (0°C to 40°C). Recommended 59°F to 77°F (15°C to 25°C)
Relative Humidity	30% to 90% non considering
Altitude	0 to 3300 feet no derating
Location	Temperature-controlled, indoor area free of conductive contaminants
Clearance Required	Top: 23.5 in. Front: 39.2 in. Rear: 23.5 in.
GENERAL
Weight (lbs)	298	496	496	496
Dimensions (WxDxH) inch	13.8 x 29.9 x 27.8	13.8 x 29.9 x 40.6	13.8 x 29.9 x 40.6	13.8 x 29.9 x 40.6
Heat Rejection (kBTU/Hr)	1.4	1.9	2.4	2.8

Description

Mitsubishi Electric 7011B Single Phase Ups

Specifications