Description

Gastec P-163-H Permeation Tube Ethylene Oxide

Gastec P-163-H Permeation Tube Ethylene Oxide Generating calibration gas with a permeation tube. with Concentration range 0.5 – 23 ppm. When housed inside a constant-temperature dynamic gas calibration generator (such as the Gastec PD-1B or standard laboratory calibration diluters), it releases a certified micro-rate mass flow of pure ethylene oxide through a fluoropolymer membrane into a controlled dilution air or nitrogen stream.

WARNING:

Use only Gastec detector tube in a Gastec Pump.
Do not interchange or use non-Gastec parts of components in Gastec’s detector tube and pump system.
The use of non-Gastec parts of component in Gastec’s detector tube and pump system, or use of a non-Gastec detector tube with a Gastec pump, or use of a Gastec detector tube with a non-Gastec pump may result in property damage, serious bodily injury, and death, voids all warranties, and voids all performance and data accuracy guarantees.

Application of the tube:

Use this tube for detecting Hydrogen fluoride in the air or in industrial areas and for determining the environmental atmospheric condition.

Specifications

Key Technical Specifications

Parameter	Specification
Manufacturer	Gastec Corporation
Part Number / Model	P-163-H / P163H
Target Chemical Vapor	Ethylene Oxide / Oxirane ( $text{C}_2text{H}_4text{O}$ )
Permeation Membrane	Fluoropolymer (FEP/Teflon) capillary reservoir
Certified Operating Temp	$30.0^circtext{C to }40.0^circtext{C}$ (specified on individual calibration certificate)
Primary Output Range	Generates $0.2text{ to }50.0text{ ppm}$ (dependent on carrier gas flow rate)
Expected Service Life	6 to 12 months (determined by operating temperature and initial fill mass)
Compatible Equipment	Gastec PD-1B / PD-1C Gas Generator series, standard dynamic gas diluters

Features

Concentration range 0.5 – 23 ppm

Applications

Medical Sterilization & Healthcare Audits: Calibrating photoionization (PID), gas chromatograph (GC), and electrochemical sensors used for workplace air monitoring in medical device sterilization facilities and hospital central sterile supply departments.
Colorimetric Detector Tube Validation: Laboratory verification and accuracy auditing of Gastec Ethylene Oxide detector tubes (such as Gastec 163 series).
Industrial Hygiene Audits: Generating low-ppm span standards to verify leak detection equipment and ambient monitoring alarms for toxic, flammable epoxide vapors.

Downloads

Gastec P-163-H Permeation Tube Ethylene Oxide

WARNING:

Use only Gastec detector tube in a Gastec Pump.

Do not interchange or use non-Gastec parts of components in Gastec’s detector tube and pump system.

The use of non-Gastec parts of component in Gastec’s detector tube and pump system, or use of a non-Gastec detector tube with a Gastec pump, or use of a Gastec detector tube with a non-Gastec pump may result in property damage, serious bodily injury, and death, voids all warranties, and voids all performance and data accuracy guarantees.

Application of the tube:

Use this tube for detecting Hydrogen fluoride in the air or in industrial areas and for determining the environmental atmospheric condition.

Specifications

Key Technical Specifications

Parameter

Specification

Manufacturer

Gastec Corporation

Part Number / Model

P-163-H / P163H

Target Chemical Vapor

Ethylene Oxide / Oxirane (

text{C}_2text{H}_4text{O}

)

Permeation Membrane

Fluoropolymer (FEP/Teflon) capillary reservoir

Certified Operating Temp

30.0^circtext{C to }40.0^circtext{C}

(specified on individual calibration certificate)

Primary Output Range

Generates

0.2text{ to }50.0text{ ppm}

(dependent on carrier gas flow rate)

Expected Service Life

6 to 12 months (determined by operating temperature and initial fill mass)

Compatible Equipment

Gastec PD-1B / PD-1C Gas Generator series, standard dynamic gas diluters

Applications

Medical Sterilization & Healthcare Audits: Calibrating photoionization (PID), gas chromatograph (GC), and electrochemical sensors used for workplace air monitoring in medical device sterilization facilities and hospital central sterile supply departments.

Colorimetric Detector Tube Validation: Laboratory verification and accuracy auditing of Gastec Ethylene Oxide detector tubes (such as Gastec 163 series).

Industrial Hygiene Audits: Generating low-ppm span standards to verify leak detection equipment and ambient monitoring alarms for toxic, flammable epoxide vapors.

Gastec P-163-H Permeation Tube Ethylene Oxide

Product Note:

Description