Original price was: Rp 85.000.Rp 65.000Current price is: Rp 65.000.
Minimum Order: 10 units
Lead Time: 5 weeks
No product notes available.
Available on backorder
Modul Relay 3 Channel Way Modulate With Optocoupler Compatible 5V 3.3V is designed to control high-voltage electrical devices safely and efficiently using low-voltage control signals from microcontrollers like Arduino, ESP32, or Raspberry Pi. This module features three independent relays, each capable of switching up to 10A at 250V AC or 30V DC, allowing you to control multiple devices simultaneously.
3 Independent Relay Channels
Each relay can control a separate high-voltage device (AC or DC).
Supports both Normally Open (NO) and Normally Closed (NC) configurations.
Wide Logic Compatibility
Works with both 5V and 3.3V signal levels.
Compatible with most microcontrollers: Arduino, ESP32, Raspberry Pi, STM32, etc.
Compact PCB Layout
Small form factor for easy integration into various DIY or industrial projects.
Turn ON/OFF lights, fans, or appliances automatically using microcontrollers like Arduino or ESP32.
Can be integrated with smartphone apps or home automation platforms (e.g., using Blynk or Home Assistant).
Control devices remotely over WiFi, Bluetooth, or GSM.
Example: Remotely turn on a water pump or door lock via the internet
Control DC or AC motors, pumps, or solenoids using logic signals from a microcontroller.
| Parameter | Description |
|---|---|
| Number of Channels | 3 relay channels |
| Operating Voltage | 5V DC (relay coil power) |
| Logic Level Voltage | Compatible with 3.3V and 5V control signals |
| Maximum Switching Current | 10A per channel |
| Maximum Switching Voltage | 250V AC / 30V DC per channel |
| Isolation | Optocoupler isolation between control and relay circuits |
| Input Trigger | Active LOW (relay activates when input is LOW) |
| Indicators | LED indicator per relay channel |
| Connector Type | Screw terminals for load connection; pin headers for control signals |
| Dimensions | Typically around 7 cm x 3 cm (may vary by manufacturer) |
| Mounting | PCB mounting holes included |
| Relay Type | Electromechanical relay |
| Compatible With | Arduino, ESP32, Raspberry Pi, STM32, NodeMCU, and other 3.3V/5V MCUs |
Only logged in customers who have purchased this product may leave a review.
The module supports both 3.3V and 5V logic levels, making it compatible with a wide range of microcontrollers.
Minimum Order: 10 units
Lead Time: 5 weeks
No product notes available.
Original price was: Rp 85.000.Rp 65.000Current price is: Rp 65.000.
Available on backorder
Modul Relay 3 Channel Way Modulate With Optocoupler Compatible 5V 3.3V is designed to control high-voltage electrical devices safely and efficiently using low-voltage control signals from microcontrollers like Arduino, ESP32, or Raspberry Pi. This module features three independent relays, each capable of switching up to 10A at 250V AC or 30V DC, allowing you to control multiple devices simultaneously.
3 Independent Relay Channels
Each relay can control a separate high-voltage device (AC or DC).
Supports both Normally Open (NO) and Normally Closed (NC) configurations.
Wide Logic Compatibility
Works with both 5V and 3.3V signal levels.
Compatible with most microcontrollers: Arduino, ESP32, Raspberry Pi, STM32, etc.
Compact PCB Layout
Small form factor for easy integration into various DIY or industrial projects.
Turn ON/OFF lights, fans, or appliances automatically using microcontrollers like Arduino or ESP32.
Can be integrated with smartphone apps or home automation platforms (e.g., using Blynk or Home Assistant).
Control devices remotely over WiFi, Bluetooth, or GSM.
Example: Remotely turn on a water pump or door lock via the internet
Control DC or AC motors, pumps, or solenoids using logic signals from a microcontroller.
| Parameter | Description |
|---|---|
| Number of Channels | 3 relay channels |
| Operating Voltage | 5V DC (relay coil power) |
| Logic Level Voltage | Compatible with 3.3V and 5V control signals |
| Maximum Switching Current | 10A per channel |
| Maximum Switching Voltage | 250V AC / 30V DC per channel |
| Isolation | Optocoupler isolation between control and relay circuits |
| Input Trigger | Active LOW (relay activates when input is LOW) |
| Indicators | LED indicator per relay channel |
| Connector Type | Screw terminals for load connection; pin headers for control signals |
| Dimensions | Typically around 7 cm x 3 cm (may vary by manufacturer) |
| Mounting | PCB mounting holes included |
| Relay Type | Electromechanical relay |
| Compatible With | Arduino, ESP32, Raspberry Pi, STM32, NodeMCU, and other 3.3V/5V MCUs |
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.