CS Instruments VA 500 – Flow Meter For Compressed Air And Gas

Product Note:

No product notes available.

Categories: Flow Measurement, Thermal Mass Flow Meter Tags: CS Instruments, Flow Measurement, Thermal Gas Flow Meter

Description

CS Instruments VA 500 it is possible to monitor your consumption and analyze your leakage flows with just one measuring device. Due to its design, it is also ideal for mobile measurements. Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system.

CS Instruments VA 500 Advantages

Measurement of mass flow direct output of standard volume flow
Highly accurate at small as well as higher flow rates
Pressure and temperature are compensated by the thermal mass flow principle
Quick and easy installation via a ½” ball valve
No moving parts, thus low maintenance
Vanishingly low-pressure drop due to vanishingly low blockage of the diameter
Can be used for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium, etc.

Features

Including temperature measurement
RS 485 interface, Modbus-RTU as standard
Integrated display for m³/h and m³
Applicable from 1/2” to DN 1000
Easy installation under pressure
..20 mA analogue output for m³/h or m³/min
Pulse output for m³ or M-Bus (optional)
Inner diameter adjustable by means of keys
Flow meter can be reset
Adjustable by means of keypad on the display: Reference conditions, °C and mbar, 4…20 mA scaling, pulse weight

Applications

Underwater Noise Protection / Bubble Curtain
Efficiency-FAD analysis for compressors
Flow meters for professionals – optionally with ATEX approval
Flow meters for oxidizing gases
Consumption sensors and flow meters for inert gases
Flow meters for toxic and corrosive gases
Consumption meter for oxygen, hydrogen, carbon dioxide
Consumption meter for nitrogen in tire vulcanization
Consumption meter for gas measurement in the aerospace industry
Flow and consumption meter for gas measurement in the automotive industry
Consumption meter for gas measurement in metal processing
Consumption sensor for flow measurement of oxygen
Consumption meter for argon and nitrogen in chemistry
Nitrogen consumption measurement in the food industry
Inline consumption meter for nitrogen generators
Flow measurement in gas mixtures as source gas
Food gas measurement
Measurement of the flow rate in a compressed air production line in the cosmetics sector

Specifications

04…20 mA, pulse and a Modbus RTU (RS 485) interface as standard. Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
Optional: Bi-directional measurement
Pressure tight up to 50 bar
Temperature range up to 110°C
Protection class IP65
Integrated display for showing the measured values
Can be used from 1/2″ up to 40″, larger diameters on request
Easy installation under pressure
Settings can be changed via the display
Main counter reading can be reset via the display
Suitable for gas velocities up to 224 Nm/s
Highly precise with an accuracy of ± 1.5% or ± 1% of the measured value ± 0.3% of the final value

Downloads

Data_sheet_VA500_EN